Altana LC 3 Bedienungsanleitung PDF herunterladen (Seite 8)

Determining/Setting the cell constants BYK LC 3

Procedure for manually setting the cell constant:

Procedure for selecting fixed cell constants 0.010 cm

-1

! Press <RUN/ENTER>. The AutoRead measurement begins.

! If the measured value is stable, the instrument displays the determined

cell constants and the calibration evaluation. The measuring instrument

automatically stores the cell constants.

! Switch to the measuring mode with <M>.

Cal

Tref25

! Press the <CAL> key repeatedly until the CELL display appears.

! Then press the <RUN/ENTER> key.

! Press the <CAL> key until a measured value and a value for the cell con-

stant appears in the required setting range.

! Set the value of the cell constant with <▲> <▼>.

! Switch to the measuring mode with <M>.

Tref25

nLF

ARng

! Press the <CAL> key repeatedly until the CELL display appears.

! Then press the <RUN/ENTER> key.

! Press the <CAL> key until a measured value and the cell constant

0.010 cm

-1

appear.

! Switch to the measuring mode with <M>.

Tref25

nLF

ARng

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 59 60

Keine Kommentare

Altana LC 3 Bedienungsanleitung Seite 8