Altana LC 4 Bedienungsanleitung PDF herunterladen (Seite 40)

Operation BYK LC 4

Note

If the timer has been stopped you can

! Reset the timer to the adjusted timer interval with <R>.

! Terminate the timer and switch to the measured value display with

<E>.

4.11 Switch-off interval

The automatic switch-off function switches off the meter automatically if no

entry is made for a specified time (switch-off interval). This saves the battery

of the meter.

You can specify the switch-off interval yourself. The switch-off interval is from

10 minutes minimum to 24 hours maximum.

7 If necessary, stop the timer before the time has expired with <g>

and make it continue with <g>.

8 As soon as the time has expired the alarm signal sounds.

Switch off the alarm signal with <(>. The timer goes on counting

with a negative sign.

9 Stop the timer with <g>.

1 Switch on the meter with <(>.

The display test is displayed.

2 During the display test (approx. 2 sec.):

Display the switch-off interval with <M>.

3 Select a switch-off interval with <>> and <<>.

4 Confirm the setting with <g>.

The display switches to the measured value display.

The automatic switch-off function switches off the meter if no entry is

made during the switch-off interval.

min:s

CLR

Day.Month

MEM

CAL

LoBat

Ident

Lap

RESET

LAP

ESC

O f F

0 4

h:min

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 60 61

Keine Kommentare

Altana LC 4 Bedienungsanleitung Seite 40