Altana Byko-Test MP0R Bedienungsanleitung PDF herunterladen (Seite 35)

35

- measurement was performed on a the cal.

standard instead of the uncoated specimen.

- measurement on a creased cal. standard.

- measurement was not performed with the

instrument placed squarely on the specimen or

the calibration standard.

Perform all measurements for the normalization

using a mean value on the same specimen.

Replace calibration standard.

Perform all measurements correctly with the

instrument placed squarely on the specimen or

the calibration standard.

Er12 Calibration standards measured in wrong

sequence during the calibration.

Repeat the calibration in the correct sequence.

Er13

(continued

on next

page)

Readings of the calibration standard are not in

the admissible interval range of the master

calibration.

Used wrong calibration standards.

Inform customer service.

Use correct calibration standards.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41 42

Kommentare zu diesen Handbüchern

Keine Kommentare